The Fresh Loaf

A Community of Amateur Bakers and Artisan Bread Enthusiasts.

My starter is having multiple cycles of rise and fall

franciscocarlini's picture
franciscocarlini

My starter is having multiple cycles of rise and fall

 

I'm feeding my 3 weeks old starter twice a day.  My kitchen is around 80ºF, and my mixture is 80g white organic flour, 20g rye flour, 16g mature starter, and 100g room temperature water. Six hours after feeding the starter is resting at its peak for just half an hour, then collapses and after 1 hour and a half starts rising again to its peak. Is this normal? I'm doing somenthing wrong? also what can i do to it takes longer (12 hours not 6 hours) to its peak? a small amount of inoculation or colder water?

Balim's picture
Balim

I'm new to sourdough (and baking bread in general), but in the short time I've been doing it, I've noticed the same behavior from my starter.  It rises to around 3x it's volume (judging by the sides of the jar) in around 4-6 hours, then collapses, then goes up again but not as high.  It seems to me that the bubbles from the first rise just get so big that they pop, deflating the starter, but the yeast is nowhere near done so just keeps going which results in the second rise.  I have been (maybe erroneously) determining peak activity, then, to be the peak of the second rise, not the first, which is around 10 hrs after feeding.  My loaves come out just perfect, with a nice open-ish crumb and lots of oven spring, so I am inclined to not change anything.  But am curious to hear what others have to say on this.

Mini Oven's picture
Mini Oven

But the first peak is what most recipes call for, just before or during.  

franciscocarlini's picture
franciscocarlini


Mine the secod rise goes higher, and it's resting at its peak for longer time. So, When should i feed it? after the first peak? I don't want to overfed it

Mini Oven's picture
Mini Oven

the starter will go thru food quickly.

"Six hours after feeding the starter is resting at its peak for just half an hour, then collapses and after 1 hour and a half starts rising again..."

To keep on a 12 hour feeding schedule, try reducing to a 10g inoculation instead of 16g. See if you can get the first peak around 8 hours, then "let it ride" for approximately 4 hours to feed at approx.12 hr intervals.  This gives the starter time to build up good bacteria pop. to defend itself for the next feeding.  

franciscocarlini's picture
franciscocarlini

I wil try what you've just told me.

Doc.Dough's picture
Doc.Dough

Another factor to consider is how hard you stirred the starter when you mixed it up. If you just got it wet, then there is little gluten to start with, but if you put some energy into mixing, then you will have a stronger, more gas-tight structure that will rise higher before it falls back.

The best way I have found to measure starter maturity is to weigh it when you mix it and then check to see when it has lost ~2% of the weight of the flour that you added.  This is a solution that works only if you are making a fairly large batch of starter (a 1g resolution scale is not very good for testing to see when you have made a levain with 100g of added flour since you are looking for only 2g of weight loss but for 500g of levain you could expect a 4 or 5g weight loss) or if you have a high accuracy scale and have at least 4 or 5 (preferably 6) digits of resolution and accuracy. Waiting for it to peak the first time and begin to fall back is a good but not perfect proxy.  The weight loss is due to CO2 escaping from the mix, and you can run the kinetics to verify the 2% number as a reasonable target.  The longer you wait, the more weight it will lose, but once it gets much past the exponential growth phase you are losing ground.

treesparrow's picture
treesparrow

Doc, about the stirring and gluten structure in the starter, wouldn't that be different for e.g. white flour wheat starters and wholemeal rye starters?

treesparrow's picture
treesparrow

sorry, I just realised there's mainly white flour in that starter, I somehow skipped that and saw only the rye :-)

Doc.Dough's picture
Doc.Dough

It is always different, but you can learn by trying and observing.  Perhaps a useful experiment is to mix one hard for a full minute and in another identical one, just add the flour to the diluted seed and tamp it down slowly to just get it wet (don't worry too much about lumps, surface tension will assure that all of the flour gets wet eventually).

Debra Wink's picture
Debra Wink

Falling in the middle may just be a sign that the air temperature dropped a few degrees. Especially from 80ºF. I do a starter demo in my classes where we compare starters grown at different temperatures, and the 80º one at peak will collapse spectacularly if I take it out of the proofer too soon before we can get to it, not because it's overripe, but because the gases contract and the yeast slow down. How stable is the temperature in your kitchen?

DanAyo's picture
DanAyo

That’s an interesting observation, Debra. I’ve seen the collapse many times as I removed the starter from the proofer. I always thought that the act of moving the starter caused the collapse.

BTW - I have maintained my starter at ~76F for a year now and (thanks to your help, and that of others) it is doing fantastic!

Danny

Debra Wink's picture
Debra Wink

Danny, if it collapses as you're jostling it, then clearly that is the cause. But this happens some minutes later just resting on the counter. 5-20 or so --- enough for the temperature to drop in the starter. In a room with fluctuating temperatures, the metabolic rate will reflect that, slowing as the temperature is declining. A slowing in the overall gas production will cause a starter to start receding, even if just a temporary lull.

Glad to hear your starter is still doing well :)

My best,
dw

johnz's picture
johnz

My starter falls in the middle, even though it is in a Brod Taylor proofer. Later it climbs up higher than the original high.

I am trying reducing the inoculation.

Any idea why I get this multi rise?

Thanks

phaz's picture
phaz

It'll keep growing as long as it has something to eat. Not at all unusual for a starter to rise multiple times, especially if stirred at some point.

Multiple rises can be an indication of over feeding  - ie. More than enough food to last a certain period of time and can weaken a starter over time. Enjoy!

Mini Oven's picture
Mini Oven

and read Debra's entries.  She mentions the proofer.   

johnz's picture
johnz

Thank you for replying.

Yes she does, but this is not quite what I am experiencing. My proofer is set to 77.

Starter is 15% inoculation, 50%whole grain, 50% bread flour 100% hydration

The starter collapses without me touching the jar; without removing it from the proofer.

Room temperature does change during the day, but it is a gradual increase. 

I suppose the proofer temperature fluctuates.

 

Debra Wink's picture
Debra Wink

How much does the room temperature change across a feeding cycle, and what time of day is the starter falling? What point in the feeding cycle is this? Is it always the same?

johnz's picture
johnz

Total cycle is 12 hours. 10AM and 10PM First fall is maybe 6 or 7 hours. Say 2 or 3 in the afternoon. After 12 hours it is back up even higher than first fall, and falls a little off of its own high. If left longer falls even more. Room temperature I am guessing changes rises 4 degrees from start. It happens a lot, not sure if always. Not checking the night rise.

This is with 15% inoculation. Same happens for higher inoculations. Have recently switched to 10%.

Flour 50% Homestead Gristmill whole grain. 50% Central Mill Artisan Plus. Filtered water at room temp. 40g total flour.

Debra Wink's picture
Debra Wink

2 or 3 in the afternoon is the warmest part of the day. If the room temperature is at or approaching the proofer's set temperature, then the heating element is not cycling on and providing the bottom heat as much as it does at cooler times of the day. The bottom of the proofer is warmer than the set temperature when it is heating, even though the air above it is pretty close. So there could be some temperature fluctuation in the starter itself.

A good way to monitor the effective temperature is to use a second jar or container, identical to the one your starter is in. Put water in it equal in weight to the starter in the other container. Keep a thermometer in the water jar. A cable-type probe thermometer is ideal for this. That way you don't even have to open the proofer to take a reading. The tip should be suspended in the water so that it doesn't touch the sides or bottom of the jar. If you need to, you can cut a couple of discs out of plastic lids/bottoms from yogurt or similar containers, one to fit down inside the jar and another to cover the top. Poke the probe through the centers, and space as needed.

johnz's picture
johnz

Thanks! I will try it. First need to get a probe thermometer. Always wanted a reason to get one!

Debra Wink's picture
Debra Wink

John, the bottom line is that if it's a temporary fall in temperature causing your starter to drop in the middle of the cycle, you can just be aware and ignore it. Or smile, because it sounds like your starter is responsive and doing fine otherwise :)   This behavior is likely to stop when we get into cooler weather.

DanAyo's picture
DanAyo

Francisco, I would use 100% flour and leave the rye out. Also, if possible, try to find a slightly cooler spot, even 77F would make a discernable difference. Cooler water would help. Another thing that will slow down your starter’s feed to recede cycle is to mix a drier starter. I personally use a 60% hydration. You could increase the starter to flour ratio, but 1 or more of the suggestion above should do the trick.

If you would post an image of the starter at first rise peak along with a mark showing the initial level, that would be informative.

FYI - using your mix requires 200 grams of flour per day. If you choose to continue room temp feeding, you can reduce the amount of starter you keep on hand. I feed twice daily at 12 hr intervals and keep my starter out of the refrigerator. I mix 3g starter + 11g water + 18g all purpose flour. Both your ratio and mine are 1 part starter to 6 parts flour. But your starter is 216g and mine is only 32g. 

I am not an authority on starters by any means. But I have struggled to learn as much as I could. See this post from last December. You and I asked the identical question. http://www.thefreshloaf.com/node/54588/how-can-i-increase-time-between-feeding-starter

I learn from many bakers on the forum, but 2 people stand out the most. Debra Wink and Abe. Search the site. Information abounds...

HTH

Dan

Mini Oven's picture
Mini Oven

l'm refreshing my wheat starters at the moment and find I have to taste the starters as well as snffing and observing volume. One rose well overnight but still tasted like raw wet flour.  Due to the cool night,  I'm just going to stir and let it ferment more and check the taste before another feeding cycle.  

Mini Oven's picture
Mini Oven

DOuble post