The Fresh Loaf

News & Information for Amateur Bakers and Artisan Bread Enthusiasts

straight dough

linder's picture

I am continuing to practice my baguettes.  This latest iteration shows some promise .  It seems my oven bakes slow.  I turned up the heat to 480F on the second batch and got some better results.  I also steamed and steamed for the first 10 minutes of the bake, then switched to convection bake, hoping the increased air flow would help to vent the steam.  One other thing I did was use 10% whole wheat flour in the formula from Txfarmer for straight baguette dough.  I also let the loaves proof a bit longer.  I will continue my quest.  I've ordered a good oven thermometer from Amazon to check the oven's temperature.  Better steaming apparatus is also in the cards - with a trip to Home Depot for some lava rocks. 


Baguette crumb -

Dror50's picture

First success!

I was finally able to produce baguettes that I am happy about.

(didn’t have the nerves to post here until I had something to show off )

Thanks to txfarmer , I flowed the formula he posted under

Straight Method Baguette - a good starter baguette to practice on 

(with title alteration on the flour parts)


This is my version, and what I did: 

Straight Dough Baguette
Note: makes 3 baguettes

400g bread flour

100g AP flour

375g water
salt, 10g
instant yeast, 2g


Mix everything together. No need for kneading. 

Bulk ferment for three hours, flood three times at 45, 90 and 135min. 

(these are an in-bowl-starch-and-fold )

After three hours pre-shape into 3 small boules. rest for 25 minutes.

Shape into Baguettes and proof at room temp for 40 minutes.

Bake at 460F(240C) for 25 min, with steam for the first couple of minutes.

Turn off oven, crack the door open, and keep baguettes inside for about 5 minutes. 

Take out and cool completely before attempting to eat. 

Note that I preheated my stone at 500F (260C) for an hour to make sure the oven is hot enough, only reduce the temp to 460F when the dough is loaded. 


Thats it! 

here are some photos 

linder's picture

Today, I decided to try Txfarmer's straight dough baguette formula on this post 

OK, I'm hooked.  I am now, along with many others, on a quest to make a good baguette.  I made a bunch at the SFBI class Artisan Bread I and it was so much easier to get a nice brown crust on those baguettes with the professional oven.  Now I'm with my home oven and the browning just isn't happening.

Here is a picture of my baguettes to date -


Close up of the scoring (which could improve but getting better)-


I would like to get the bread to have a little more color.  Not sure what the issue might be.  I have a  gas oven. I used the towel steaming method that SylviaH explained in detail(thank you).  It helped open the scoring. Perhaps I didn't have the steaming loaf pans in the proper positions?  I also used quarry tiles on the top shelf over the baguettes in hopes of creating more of a brick oven effect.  Was that a mistake?  I would like more color on the baguettes.  Should I add some diastatic malt to the mix?  I was using KAF Bread flour not AP, would that do it?  Any and all ideas welcome


frenchcreek baker's picture


October 25, 2012 - 4:23pm -- frenchcreek baker

Hello bakers,

The HAINS HOUSE is offering 3-day Artisan Bread Baking Workshops. 

If you are looking for a bread get-away or maybe a nice baking gift for someone, this workshop at a farm B&B could be perfect.

Classes will be offered NOVEMBER 2-4th, 2012; JANUARY 25-27th, 2013, and FEBRUARY 22-24TH, 2013.

Pat has an Italian wood-fired Valoriani Oven in a beautiful, tranquil setting. The course includes lodging and all meals.'s picture

Ok, maybe French Toast.  But I heard this reference to Elizabeth David's easy-peasy Summer Pudding recipe by Linda Wertheimer on NPR a while back and thought this has to be a sign:  A use for one formula in my Summer 2012 Tour de Hamelman that I would otherwise have been hard pressed to find, and a smashing crop of raspberries just pouring off our vines this year (plus some market-sourced blueberries).  Pain de Mie would have sufficed, but Chef Jeff's Toast Bread's slightly elevated richness seemed more appropriate.  As a straight dough, its ease of prep fits with the no-frills simplicity of Elizabeth David's recipe, offered here in the Oxford Times.


Can't go too far wrong with a desert consisting of nothing more than bread, fresh fruit and sugar.  With a scoop of vanilla ice cream or frozen yogurt, this is one utterly satisfying seasonal pleasure.



breadforfun's picture

Greetings all.  After returning from a few weeks traveling (pleasure and business), I have been waking up my starter from a prolonged hybernation.  I was looking through some very old recipes for a straight dough bread to make in the meantime, and I found this recipe in an ancient archive.  In fact, I'm guessing it is one of the first (if not the first) yeasted bread I ever made oh so many years ago.  It is Cottage Cheese Onion Dill, and is very tasty and makes a nice sandwich loaf with its tight crumb.  It uses very little water with cottage cheese and an egg supplying most of the liquid.  Sometimes it is nice to have bread in only 3 hours. The recipe follows the photos.  Hope you enjoy it!


jennyloh's picture

I've on a quest to make baguette,  fluffly,  thin crust,  light, open crumbs.  My baguettes so far has been on a thicker crust,  not so open crumbs and a little too chewy. I'm not sure when I will be able to to achieve what I want to achieve, but I'm starting to keep track of this records in my blog.

So far,  I've done 3 experiments,  they are still not ideal at all.  I'm looking to improve my techniques before I go for taste.  Currently,  I'll stick to a recipe from Peter Reinhart on french loaf. I'm going to continue trying until the day that I can consistently achieve what I'm looking for.

Perhaps I'm so used to having Asian baguettes, especially the Japanese bakeries here.   Actually I have no idea how a french baguette looks or taste like,  only from the local french bakery here,  not sure if it is authentic.  Anyway,  we like the taste of baguettes that are really light,  crusty, flaky crust,  open crumbs and doesn't quite fill your stomach even when you eat up a full loaf.

I'd be happy to hear from anyone who has suggestions for me on my techniques.  Here are also some pictures to show you what I've done so far.


houstonwong's picture

Buns/rolls made with French bread dough

December 1, 2010 - 11:07pm -- houstonwong

My sister loves dinner rolls/buns. So I figure I'd use it as a chance to really try out French folding. My previous attempts have been somewhat half-hearted. But this time, I thought I’d really do it right, focusing on stretching and trapping air.


For the formula:

Strong Canadian white flour 13.3% protein

75% hydration

0.5-0.6% instant yeast

2% table salt


pmccool's picture

After several not-so-happy outcomes, and one pleasing outcome, it was obvious that I needed to get better acquainted with the South African flours that I have.  Previous bakes seemed to indicate that the flours' absorbency was different than I was anticipating, based on my previous experience with U.S.-produced flours.  The only way to find out what was going on with any certainty was to do side-by-side bakes of identical breads, adjusting only one variable (hydration, in this case) at a time so that I could compare the outcomes.

For this bake, I decided to use a 50/50 mix of brown bread flour (protein content in the 12%-12.5% range) and bread flour (protein content in the 11.5%-12% range).  Although the label isn't altogether clear, I think that the brown bread flour is either whole wheat, or possibly de-germed wheat.  It contains large particles of bran.  Note that the same miller also produces a "Nutty Wheat" flour that they describe as white flour with the bran mixed back in.  I used 2% salt and 1.6% yeast (IDY).  Hydration levels ranged from 55% to 80%, in 5% increments.  Each dough contained 100g flour, to make the math easy.  (It also makes a pretty decent size roll for sandwiches.)  The dry ingredients for all of the doughs were premixed in one batch, then weighed out for individual mixing with the selected quantity of water.  These are straight, lean doughs; no preferments or enrichments were used.  This was to eliminate the potential for other ingredients masking the effects of differing levels of hydration.  Autolyse was not used for any of the doughs.  All mixing was by hand.  No bench flour or water was used.  Room temperature was 75ºF-77ºF.  The temperatures of the ingredients and the finished doughs were not measured but are assumed to be within 3ºF-5ºF of room temperature. The water came straight from the tap, compliments of the City of Pretoria.  All doughs were fermented on a lightly oiled granite countertop and covered with oiled plastic wrap.  Each was preshaped after the bulk ferment, then given 15-20 minutes to rest before final shaping.  Breads were baked for 25 minutes on a sheet pan in a 400ºF oven, with light steam.  

Observations are as follows:

55% hydration - this dough was very stiff and did not want to come together in the bowl.  The dough was dumped out on the countertop to finish mixing/kneading.  All flour was incorporated and after several minutes of kneading, the dough smoothed out and became pliable with almost no tackiness.  This dough was the slowest to rise.  Due to an interruption in the process, this dough had approximately 2 hours of bulk fermentation and barely doubled in that time.  The finished bread was the smallest of any in this test bake, having risen less after shaping even though it had the longest final fermentation duration.  The crust was thick, hard, and tough; the crumb very tight and dense and slightly gummy, even though the bread was thoroughly cooled before slicing.

60% hydration -  This dough was also somewhat stiff, although it was fully mixed in the bowl, unlike the 55% dough.  Pliability was better than the 55% dough and the dough was just slightly tacky at the conclusion of kneading.  The bulk ferment was slightly less than 2 hours and the dough was a bit more than doubled in that time.  The finished bread was only slightly larger than the 55% hydration bread, exhibiting a similarly hard/tough crust and dense crumb.  However, the crumb was not gummy in the finished bread.  

65% hydration - Early in the mix, this dough was sticky, although that improved to being moderately tacky by the end of kneading.  The dough cleaned the bowl with all flour being absorbed.  The bulk ferment was approximately 1:20 and the dough inflated to about 2.5 times its original volume in that period.  The finished bread still has a tight crumb, but the crust is thinner and less resistant to cutting.  Size is slightly larger than the two preceding breads.

70% hydration - This dough was noticeably stickier during mixing and kneading than the previous doughs.  It did clean the bowl during mixing.  I wound up using a combination of standard kneading and stretch and fold to manage this dough (not easy with such a small sample).  I don't think it would have come together without the stretch and fold technique.  At the end of kneading, it was still more sticky than tacky, with some sticking to my fingers.  It had about a 1 hour bulk ferment, during which time it nearly trebled in volume.  This bread also rose more after shaping, and was significantly larger in volume than the preceding breads (and, consequently, felt "lighter" because of the reduced density).  The crumb was the most open of any the breads made to this point.

Intermission - a co-worker stopped by to drop off some things just as I was finishing kneading the 70% hydration dough.  That inserted about an hour's delay between the 70% dough and starting the 75% dough.  All of the first four doughs were baked on the same sheet pan at the same time.  The last two doughs were baked on a separate sheet pan.

75% hydration - This dough never stopped being sticky.  It did not entirely clean the mixing bowl.  Standard kneading techniques were not working, so I switched to using the French Fold.  Kind of a challenge with such a small quantity of dough.  This bulk proofed about 45-50 minutes, easily doubling in that time.  Slashing before baking was problematic because of the dough's stickiness.  The finished bread was larger than its predecessors, felt "lighter" still, had a thinner crust and a more open crumb.  

80% hydration - This was an extremely sticky dough.  It had to be scraped out of the bowl after mixing and repeatedly scraped from the bench while kneading.  The only kneading technique that worked was the French Fold method.  Even that took several minutes (not several cycles) before the dough started to exhibit some structure.  This dough expanded the fastest during the bulk ferment and grew the largest after shaping, even though it had the shortest times in both ferments.  The knife dragged a trench in the dough, but did not actually slash it.  The finished bread had the thinnest crust and most open crumb of any of the breads in this test bake.

Follow-up thoughts:

1. One of the notions going into this test was that the city water might be a culprit in some of the former bakes.  Based on the results of this test bake, I think I can get good bread using city water, without going to the effort of running a similar test using bottled water.

2. For this blend of these particular flours, a hydration of approximately 70% seems to offer the best dough handling traits and a pleasing finished bread.

3. None of the doughs experienced much oven-spring.  I would attribute that to handling during shaping that was not gentle enough (too much degassing) and to baking on a cold sheet instead of on a hot stone.

4. It appears that the jury is still out on my starter.  Most (not all) of the previous bakes that experienced problems were sourdoughs, rather than yeasted breads.  This starter may be too acidic or too enzymatically active, either of which might be leading to gluten attack.  I'll see how it behaves after a few days of rye feedings.

5. I'm still not sure how much effect, if any, altitude is having on the results (I'm at approximately 4200 feet elevation in Pretoria, compared to having been at about 800 feet elevation in Kansas City).  I can't control for that, so I'll use the results of this test as an indicator of what to do with future bakes.

6. Weather today was mostly sunny, with outdoor temperatures nearing 80ºF while I was running this test.  I didn't think to check the relative humidity while running the test.  It's now 47% at 75ºF, about 7 hours after starting the test.

7. Since this is a whole wheat blend, I'll be interested to see whether I can get better results at either the 65% or 70% hydration levels by utilizing an autolyse step in the process.

Front row: right, 55%; center 60%; left 65%.  Back row: right 70%, center 75%, left 80%.  The 75% and 80% doughs have just been mixed and kneaded.  The others have been on the bench anywhere from nearly 2 hours (55%) to just over an hour (70%).  It's a good illustration of how hydration affects the fermentation rate.

Right to left, finished breads, lowest (55%) to highest (80%) hydration.  Note that these were initially shaped to be the same size.  Growth occurred during final proof and baking.

Crumb of, right to left, lowest (55%) to highest (80%) hydration.  I think the crumb of the three higher hydration breads (70%, 75% and 80%) ought to have been more open than this.  That they aren't is probably an indication that I was too forceful during shaping and degassed the breads too much.  An autolyse step might also help.

That's today's effort.  It's one datum, not a trend, but I can use it as a benchmark for future bakes for gauging how much hydration is required and to make some educated guesses about the effects of added fats or sweeteners for enriched doughs.  Now I suppose I should do something similar for panned breads...





Subscribe to RSS - straight dough