The Fresh Loaf

News & Information for Amateur Bakers and Artisan Bread Enthusiasts

Ciabatta

  • Pin It
maggie664's picture

Leftover bread recipes

May 5, 2007 - 11:39pm -- maggie664

For the Antipodean summer just past we have used 3 recipes using toasted ciabatta pieces having 'overdone' Caesar Salads! the first is a pasta recipe which we really loved. It was rather like a warm salad.

ELICHE WITH ZUCCHINI

Serves 6

6 Tb extra virgin olive oil
2 cups ciabatta, ripped into 2 bite-sized pieces
salt and freshly ground black pepper
6 zucchini, sliced 1cm thick
1 large red onion, finely chopped
3 cloves garlic, finely chopped
peel of 1 preserved lemon, chopped (or zest of 1 lemon)
1 cup green olives
1 tsp dried oregano (I use 1 Tb fresh)
150ml dry white wine

bwraith's picture
bwraith

Sourdough Ciabatta - One Step

Sourdough Ciabatta - One Step (1)Sourdough Ciabatta - One Step (1)

Sourdough Ciabatta - One Step (2)Sourdough Ciabatta - One Step (2)

Sourdough Ciabatta - One Step (3)Sourdough Ciabatta - One Step (3)

Sourdough Ciabatta - One Step Recipe

I made my first attempt at a "one step" recipe, similar to Sourdough-guy's recent blog entry (thanks, SD-guy). Photos of the process are posted. A spreadsheet showing the quantities in ounces and grams, bakers percentages, and some other percentages, such as hydration is also posted.

I wanted to use some more of my "sifted flours" obtained during a recent phase of obtaining and testing some "sifted whole wheat" flours for the fun of it. You can create a substitute for this flour by substituting a mixture of 87% white flour with 10% whole wheat and 3% wheat germ by weight. If you don't want to use wheat germ, you might try something like a 50/50 mix of white flour and whole wheat flour. I haven't tried doing it with all whole wheat, but I suspect that would also make something good with this recipe. The "sifted whole wheat flour" I used is "Golden Buffalo" from Heartland Mills. It is described as sifted so that the germ and 10% of the bran remains in the flour, which makes it about 87% extraction flour. It's characteristics are much closer to whole grain flour than white flour. For example, it absorbs a lot more water before it becomes slack like a ciabatta dough, and it has fairly high ash content and and protein percentage, and it results in a darker crumb and nuttier tasting crumb. Also, it is a high protein flour to begin with, as it is made from a higher protein wheat. At some point, I'll make this with something like KA organic AP, which should rise better and have a softer crumb and a more typical white ciabatta crust color.

Overall, this recipe worked fine, although I realize now that I probably needed to be a little more agressive about rolling and tightening the loaves when they were shaped, as there was the "big hole down the middle" problem to some extent with these loaves, particularly the ones I shaped more gently and baked first. The ones I let proof a little longer also happen to be the ones I shaped a little more tightly, and they seemed to come out better.

Ingredients:

  • 57 grams 100% hydration white flour starter (almost any reasonably active, recently enough refreshed starter will do)
  • 2 grams diastatic malted barley flour
  • 14 grams salt
  • 665 grams water
  • 57 grams light rye flour (I used KA rye blend)
  • 610 grams high extraction wheat flour (I used Golden Buffalo from Heartland Mills - You can mix some AP or bread flour w/whole wheat and wheat germ as mentioned above)

Mix and Rest

Place starter in a large mixing bowl and add the water. You may want to mix only 540 grams of water to begin with, which is 82% hydration. Then, after you've added all the flour, you can mix in more water until you get the right consistency. The water absorption properties of flours varies over a large range, and the amount of water I used in this recipe is at the very high end of what you're likely to need, due to the type of flour I happen to be using. Stir the water and starter well to get the starter dissolved into the water. Add the diastatic malted barley flour and mix well again. Add the rest of the flour and mix just enough to blend everything with a spoon, dough hook, scraper, as you like. Or, do this all in a mixer but use low speed and mix for only 3-4 minutes just to get the ingredients well integrated. Then add the salt, sprinkling it over the whole dough and folding it in. At this point go around the bowl with your tool scraping the outside of the mass into the center and pushing down, similar to a fold, a few times to incorporate some air and mix the ingredients with the salt well. You don't need to do much more than get the ingredients reasonably well mixed.

You may need to add either flour or water to adjust the consistency of the dough. The dough should be fairly wet. It should be more stiff than a batter, but it should feel wet and pliable. It will feel a little wetter as the water incorporates into the flour. At some point the gluten will develop, and it should become an elastic, somewhat slack, pliable dough. In my case, I am using 100% hydration, which is higher than you're likely to need unless you are using a high protein hard whole grain flour, like a hard spring wheat from the northern plains. The flour used in this recipe is of that type, except it has 90% of the bran sifted out. It takes a lot more water than if you make this with mostly white flour. So, you have to do this by feel. What should happen is that when you eventually pour this dough out on the counter to fold it, it should spread out slowly over the course of a minute or so. It shouldn't be runny, but it shouldn't hold it's shape well either.

Cover the bowl with a moist towel and set aside for an hour.

Fold in the Bowl

The first fold probably needs to be done in the bowl, if it is as wet as it is supposed to be. Reach under the dough with a scraper on an edge, lift it up and out a little holding the top gently with your (wetted) fingers, stretching it just a little, then fold the edge over to the center. Do this for all four sides. Let it sit another hour or so.

Fold on counter

An hour after the first fold in the bowl, the gluten should be forming enough to do the folds on the counter. Gently loosen the dough from the bowl and pour it out onto the counter on a light bed of flour. Spread the dough out a little if it doesn't spread out all on its own. If it is very wet, it may not need any help spreading. If it's not quite so wet, you can encourage it to spread out with your fingers or palms. Don't stretch it aggressively, just spread it out, which it should readily do if it is wet enough. Wet your hands well to get all stickiness off them and shake off the drops a little bit. Snuggle your hands under one edge of the dough and gently lift it up and out slightly. Then fold it over to the center or past the center somewhat. Do this for all four sides. If it ends up as a nice tall cube shape, pick it up and turn it over. Then drop it into a dough rising bucket or a bowl for further fermentation. To make it easier to pull out of the dough rising bucket the next time, you can either spray the bucket with some oil spray or give the dough a good dusting with bread flour on the sides before dropping it into the bucket. I often get a rectangular shape after the last fold, since I'm still not anticipating the size of the folds perfectly. If so, you can fold it over itself one more time to make it more of a cube shape and roll it over to bring the stretched side of the dough on top all in one move to end up with a tall cube of dough. Then it can be picked up from the sides or slightly underneath and lowered gently into a rising bucket.

Wait an hour and fold, wait another hour and fold, etc., as above until it begins to have some "resistance" to folding. The gluten will develop all on its own with time and some folding. In my case I did 3 folds on the counter. Ideally, you can wait as long as it takes for the dough to flatten out, as a liquid would, before folding. That's the indication the dough has "relaxed" and is ready for another fold. After a few folds, the combination of gluten developing and enough time going by for the fermentation to start to generate some gas will result in a slight "crown" forming in the dough as it sits in the bucket, so that the dough won't really flatten out anymore. You can try folding again and should now begin to be more elastic and resistant to folding, consistent with the gluten development.

Bulk Fermentation

I intended to have the total rise time be about 12 hours, and I guessed the amount of starter accordingly. I started the mixing a few hours before I went to bed. It did double in about another 7 hours after the last fold, allowing for a good night's sleep if you're a bit of a night owl like me. You can adjust the time to your convenience by putting less starter in at the beginning. I would think it would take about 2-3 more hours for each halving of the amount of starter, but maybe Sourdough-guy can put a finer point on that. The one step method is new to me, so I still haven't developed a good feel for the timing over extended periods with a very small percentage of starter in the dough.

Shaping

When the dough has doubled, turn it out on the counter in a bed of flour. It will be full of air and very soft and slack. Fold it over itself once to get a long rectangular dough. That one fold will stiffen the dough a little. Gently slice the dough into four equal size pieces. Dust the cut ends with flour or roll the pieces in flour. Lay the pieces out in rectangles about 10 inches long and 4 inches wide by gently stretching them in one direction. Roll them up fairly tightly along the short end, occasionally folding the ends of the roll into the center if it is getting too long as you roll it up. Dust them well with flour and place them in a dusted couche. You may want to use some rice flour mixed with bread flour to dust the couche. The dough is very wet and will be sticky. However, if you dust the dough itself well, and also dust the couche with a combination of rice and bread flour it should be OK. I use 25/75 rice/bread flour to dust the couche. I spray the tops of the loaves with some oil and dust with some flour in order to get that ciabatta flour streak crust look.

Final Proof

Cover the loaves with a towel and allow to rise at room temperature for about 1.5-2 hours. I didn't try getting them warmer, like 80-85F as in Sourdough-guys recipe. Also, I am not sure how long the final proof ought to run, and the poke test is harder to read with this higher hydration dough. The longer proofed, slightly more tensioned loaves had a better crumb and rise, so maybe I didn't let the proof run long enough.

Sourdough-guy suggested an estimate of more like 4 hours for the final proof in his recipe from which I derived the recipe in this blog entry, so it may well be I have underestimated the right length for the final proof. I will try a longer proof next time, and if someone tries this recipe and goes for a longer final proof with good results, I would appreciate your comments.

Bake

Place the loaves on a parchment dusted with corn meal or other similar flour to avoid sticking. As you place them on the parchment stretch them out to about 10 inches long. Then use your fingers to press down firmly all over the dough to dimple it and spread it out. I lightly sprayed the loaves with water using an atomizer pump spray bottle. You should have about a 10 inch by 5 inch rectangle when you're done with lots of dimples on it and only about 1/2 inch tall. Bake at 450F for about 18 minutes. I think the crust color darkening is the best indication of doneness, as it seems like the internal temperature isn't a very good indication of doneness for this very wet, airy, flat dough. These only rose to about 1.5 inches. I'm not sure if this is due to my flour choice or the amount of proofing. I suspect that any whole wheat-like flour may tend not to rise quite as much as a similar white flour version. However, it may also have to do with finding the right amount of time for the final proof.

Cool

Allow to cool completely. The crumb will not set properly if you cut into it too soon.

Results

The crumb was soft, cool, and creamy, and the flavor was mild with a nice after taste and only a touch of sour flavor. I believe this is fairly consistent with what I've been reading in Sourdough-guy's blog on the topic of "one step" sourdough. I get fairly similar results with my two step methods of past blog entries. However, I'm realizing that my mild results are probably the result of feeding my culture frequently, i.e. before it is very, very ripe, and also from refrigerating my intermediate "recipe starters" when they have just doubled or even earlier. I also stop my bulk fermentation when the dough has just doubled. The result may therefore be similar to the one step method, since not letting each intermediate step ripen should make the whole process closer to one long slow rise from a small percentage of starter. I think the two step method can result in more sour and stronger flavors if you let the starter and "recipe starter" ferment to a riper stage before adding them to the dough.

As with most of my attempts with sourdough ciabatta, the result is a chewier crust and slightly chewier crumb than yeast raised versions I've made. Also, the rise isn't quite as dramatic. However, the flavor more than makes up for it, and I like the chewy texture most of the time. If doing a barbecue or hamburger sandwich bread, I might prefer a white flour and probably would prefer a yeast raised version such as the Glezer recipe in Artisan Baking.

Feedback

My blog entries are written with the intention to share with and learn from those who participate here. Questions and suggestions regarding the written explanations or improvements to the methods are welcome.

bwraith's picture
bwraith

Sourdough Ciabatta - Second Try

Sourdough Ciabatta - Firm Starter Version (loaves)Sourdough Ciabatta - Firm Starter Version (loaves)

Sourdough Ciabatta - Firm Starter Version (crumb and loaf)Sourdough Ciabatta - Firm Starter Version (crumb and loaf)

Sourdough Ciabatta - Firm Starter Version (crumb)Sourdough Ciabatta - Firm Starter Version (crumb)

Sourdough Ciabatta - Firm Starter Version (slice)Sourdough Ciabatta - Firm Starter Version (slice)

Sourdough Ciabatta - Firm Starter Version

One of the favorite family breads seems to be ciabatta, and this sourdough version is clearly preferred (wolfed down) by my kids for its flavor. I've achieved a little better crust and crumb with yeasted versions, particularly the one in Maggie Glezer's "Artisan Baking", but the sourdough flavor is hard to beat, especially with salty grilled left over meats in sandwiches. The recipe is loosely based on the BBA (Reinhart) "Poolish Ciabatta", as well as incorporating ideas from Maggie Glezer's version in "Artisan Baking".

This is a work in progress, but I like the way this one turned out - my second blog entry on this recipe. The flavor is a little mild, which may mean I need to lengthen and/or retard the fermentation, or maybe use somewhat more ripe starter, an exercise for future attempts.

Many thanks to various contributors to this site as always, and especially in this case to Zolablue, who encouraged me to pay more attention to ciabatta with some just great photos and discussions about how to achieve better holes in ciabatta through hydration, proper handling, and flour choice, all of which were used here, (again) after much feedback from my first blog entry on the topic.

This version has been changed to use a lower percentage - around 22% - of flour contributed by the starter, and the starter itself is a firm starter, instead of the usual 100% hydration starter I had been using. My theory here was to try the flavors from the firm starter, as well as lower the percentage of starter in the recipe. The higher percentage seems to cause problems with the texture of the dough before it gets a chance to rise. Zolablue and I have both had good success with a "hybrid" method where some yeast is added to the dough to compensate. However, I was curious to see if I could find a percentage that might work with a pure sourdough raise. The result was a higher rise, but I seem to have made the hydration a little high, as the holes are a little too extreme for my tastes. However that should be solved by simply lowering the hydration on my next try. Also, I ran out of KA AP flour, so I substituted some "sifted red whole wheat flour" from Heartland Mills, which is called "Golden Bufallo". They say it is a "high extraction" flour, i.e. the germ and endosperm is in the flour, but most of the bran has been sifted out. I have found it to be a very good flour for rustic breads. It gives the crumb a darker color and there is a nuttier flavor than with KA. Well, I wish I had just stuck with KA organic AP in this case, as the result was a little more rustic than I had in mind. I suppose there are those who would treasure this result and call it something on the way from white ciabatta to "ciabatta integrale".

Photos of process have been posted for this ciabatta using a firm "recipe starter". Don't worry, you can build this starter from any consistency starter you may have by just setting the hydration to 65%, letting it rise by double and refrigerating overnight. A spreadsheet is also posted showing weights in ounces or grams.

Recipe Starter:

  • 2 oz 100% hydration starter (Use whatever starter you like. The intention is a 65% hydration firm starter)
  • 4.5 oz bread flour (I used KA Bread Flour)
  • 2.5 oz water

The day before this bread was baked, I took my "BBA style barm", a 100% hydration starter fed with KA Bread Flour, out of the refrigerator. It had been fed within the last couple of days and was fresh and strong at the time it was refrigerated. I mixed the starter with KA Bread Flour and water in the amounts above and kneaded it for a couple of minutes to form a dough. I then put the dough in a container sprayed with a little oil and left it to rise by double - about 4 hours. Once it had risen by double, I refrigerated it to be used the next day in the dough. Note that it is not necessarily a good thing to let the dough rise by more than double or become overly ripe, as it may affect the consistency of the dough the next day.

Dough:

  • 9 oz of recipe starter from above
  • 12.5 oz AP Flour (I used KA organic AP flour
  • 5 oz high extraction red wheat flour (like Golden Buffalo from Heartland Mills, use AP for a less rustic result)
  • 2 oz KA Rye Blend Flour
  • 16.5 oz water
  • 0.5 oz salt (14 grams)
  • 1/2 tsp diastatic malted barley flour

Autolyse:

Mix all flours but 5 oz of AP flour, diastatic malted barley flour, and water together and mix on low speed just enough to get a well mixed batter. Let this sit 20 minutes. I'm trying to simplify the processing relative to the last version by using my mixer for a change.

Mix:

Cut up the starter into small pieces and mix it in along with the salt. Run the mixer for a minute or so to get a good mix of ingredients in what should still be a thick batter consistency. Then, add in the remaining 5 oz of flour as you run the mixer on a low speed. It should turn into a very slack dough after another couple of minutes. I tried to show a picture of it hanging off the mixer dough hook, so check out the photos of the process linked up above.

Bulk Fermentation and Folding: (about 4 hours)

Make a fairly thick bed of flour on the counter about 12 inches square. Using a dough scraper, pour the dough out into the middle of the bed of flour. Allow it to rest for a few minutes. Then, fold the dough by flouring or wetting your hands, then grabbing one side of the dough and lifting and stretching it, folding it over itself like a letter. Do this for all 4 sides. Brush flour off the dough as you fold over the sides that were in contact with the bed of flour. You don't want to incorporate much flour into the dough as you fold. After folding, shape it gently back into a rectangle or square, turn it upside down and push the seams underneath. Place it in a rising bucket or other rising container of your choice. I spray mine with oil to make it easy to remove the dough. I also spray the top of the dough and then dust lightly with flour. Cover the container and allow to rise. Repeat the folds approximately every hour three more times. You just turn it back out on a light bed of flour - you need less flour once the dough is folded a couple of times. Always brush off flour as you fold it to avoid incorporating flour in the dough. If the dough seems very resistant to stretching, only fold it from two directions instead of four. You don't want the dough to get really stiff from too much folding. The amount of folding you will need will be more if you have more water and less if you have less water. Note that even an ounce can make a very big difference in the consistency of the dough. The dough should rise by double over a total of 4 hours. My dough was sitting at about 76F, so you may have to wait a little longer in a cooler room temperature environment. Stop folding if the dough gets too stiff. This means you didn't get as slack a dough as I had here, probably because of less water or maybe because of a different style of flour. No problem, just fold when it is stretchy, but let it rest and rise if not.

This is the first time I used Zolablue's suggestion to put the dough in a container as in Glezer's Artisan Baking, as opposed to doing it on the counter as in the BBA by Reinhart, and as done in my previous blog entry on sourdough ciabatta. I felt it worked well and had a few advantages. First, you can tell easily how much the dough has risen. That's a good thing because the poke test is hard to interpret with this very slack dough. Second, flour doesn't get stuck to the bottom because of the wet dough sitting on the counter in a bed of flour during the rise. I found that the crust was easier to control. Before I was having trouble with big chunks of wet flour paste getting stuck on the dough. I think that can actually look nice and be a characteristic of ciabatta crust, but it seemed to be a little too much that way with the wetter doughs I've been using to make these ciabattas. The last thing is that you can control the bulk fermentation temperature much more easily with the dough in a container that you can move to a good spot for rising.

Shaping:

Divide the dough into four pieces of equal size, roll them in the bed of flour to dust the cut ends, and let them rest a few minutes. To shape, take one of the four pieces, stretch it out and roll it or fold it over itself very gently. With ciabatta this amounts to a gently stretch and fold like a letter. You want to create some tension in the surface of the dough by folding it over itself that way. I sometimes have to roll it up a little more than just a letter fold to give it some tension. Then if you place the dough folds down on a couche, it will seal up the seams. Use the couche to create folds for the ciabatta and then nestle the folds between supports, such as bags of flour or whatever system you may have similar to what you might do for baguettes. I usually also roll the ends underneath a little to get some tension in the ends of the dough.

Final Proof:

Let them rise in the couche for about 1.5 hours, until they are puffy and have increased significantly in volume.

I baked two loaves at a time, so I proofed two loaves for 1.5 hours and two loaves for 2 hours. Da Crumb Bum - you may be right about these SD ciabatta recipes being on the edge of overproofing. I found that the first batch had darker, harder crust, whereas the second was a little bit on the pale side, even though I baked both for the same amount of time in an oven that I know was fully heated and at the same temperature. Also, the oven spring was much better on the first batch. I believe the steam conditions, temperature, and handling were very, very close to identical for both bakes.

Prepare to Bake:

Preheat oven to 500F (yes, you can probably do it without preheating, as mentioned elsewhere on the site, but it's not what I did this time). While that is going on, take each loaf out of the couche, gently stretch it in one direction by about double, lay it on a peel, maybe with parchment paper underneath, maybe sprinkled with corn meal or similar, and use your fingertips to flatten out and dimple the loaf. You can press down fairly firmly to feel the peel underneath. It sounds crazy, but the loaf will bounce back just fine in the oven if it is not overproofed. This step is important to avoid "separation of crust and crumb" or "one gigantic hole" instead of many holes. It also evens out the loaf so it has a nicer shape after baking.

Bake:

Place loaves in the oven and lower temperature to 450F. Bake for about 15 minutes, until the internal temperature is around 209F (I'm near sea level), rotating them after about 9 minutes. You can bake them longer to get a darker, harder crust, or less to get a lighter softer crust. If you bake them in a dry oven for shorter times, you will get a softer crumb and a crispy, thin, lighter crust that is very good if you intend to use these for sandwiches. If you want a chewier, drier bread with a tastier, harder crust, then bake them more and use steam. Then it is a great bread to just dip in olive oil or use like french bread with dinner. The loaves should spring up from their "flattening" with your fingertips, such that not much evidence is left of the dimples you made with your fingers.

The oven spring on these was better than in my first version. The dough also seemed handle more easily. It seemed to stretch without tearing during the folds and didn't seem as sticky. I was happier with the lower percentage of starter in this dough. I wish I had the KA organic AP for the recipe, just for comparison, and also because I liked the soft white crumb, but this one is good for a more rustic effect. The size of these loaves was about 10in x 5in x 2.5in. This is a better oven spring than last time. They were about 3 inches high right after baking, but they shrunk back down to 2.5 inches after cooling off. That's still quite a bit better than the previous version, which was about 2 inches tall. It's probably true that the best of both worlds would be hybrid method, i.e. add about 1/2 to 3/4 tsp of instant yeast to either this recipe or my previous version and get a little bit faster rise and a softer, lighter crumb, as well as getting the sourdough flavors in there.

Cool:

Let bread completely cool, if you can stand to wait.

This bread is especially good for sandwiches, sliced in half and then sliced along the "flat" direction to open up like a hamburger bun. It is great for burgers, steak sandwiches, ham, or just with olive oil and pepper.

redivyfarm's picture
redivyfarm

My mission has been to get large, glossy holes in a bread like the wonderful examples I have been admiring. I achieved some degree of success with the NYT no knead recipe this weekend. I followed the recipe faithfully and even used the floured cotton towel technique. The soft dough stuck to the cotton, but not too badly. There was no problem with the bread sticking to the dutch oven. It pulled away from the sides as it baked.  I did leave it in the oven long enough to scorch the bottom a bit in an attempt to get a deeper brown top crust.

Dutch Oven loaf

Dutch Oven loaf

Dutch Oven crumb

Dutch Oven crumb

I used grocery store bread flour this baking as opposed to the high gluten flour and added vital gluten I have been baking with.

I tested my simple ciabatta recipe once again flavored with extra unrefreshed starter. I consider this a yeast recipe rather than a hybrid because the old starter I used had very little leavening potential but a super flavor. Again it yielded a tasty batch with a slightly more open crumb than last week's baking. Maybe my folding is improving!

Simple Ciabatta- 2

Simple Ciabatta- 2

The recipe is as follows-

Simple Ciabatta- INGREDIENTS-
  • For Sponge 
  • 1/8 teaspoon active dry yeast
  • 2 tablespoons warm water (110 degrees F/45 degrees C)
  • 3/8 cup of old starter at room temperature
  • 2 tablespoons warm water
  • 1 scant cup bread flour
  •  For Bread
  • 1/2 teaspoon active dry yeast
  • 2 tablespoons warm milk (110 degrees F/45 degrees C)
  • 2/3 cup warm water
  • 1 tablespoon olive oil
  • 2 cups bread flour
  • 1 1/2 teaspoons salt
DIRECTIONS
  1. To Make Sponge: In a small bowl stir together 1/8 teaspoon of the yeast and the 2T warm water and let stand 5 minutes, or until creamy. In a bowl stir together yeast mixture, 2T water, 3/8 cup starter and 1scant cup of the bread flour. Stir 4 minutes, then cover bowl with plastic wrap. Let sponge stand at cool room temperature for at least 12 hours and up to 1 day.
  2. To Make Bread: In a small bowl stir together yeast and milk and let stand 5 minutes, or until creamy. In bowl of a standing electric mixer fitted with dough hook blend together milk mixture, sponge, water, oil, and flour at low speed until flour is just moistened; add salt and mix until smooth and elastic, about 8 minutes. Scrape dough into an oiled bowl and cover with plastic wrap.
  3. Let dough rise at room temperature until doubled in bulk, about 1 1/2 hours. (Dough will be sticky and full of air bubbles.) Turn dough out onto a well-floured work surface and cut in half. Transfer each half to a parchment sheet and form into an irregular oval about 9 inches long. Dimple loaves with floured fingers and dust tops with flour. Cover loaves with a dampened kitchen towel. Let loaves rise at room temperature until almost doubled in bulk, 1 1/2 to 2 hours.
  4. At least 45 minutes before baking ciabatta, put a baking stone on oven rack in lowest position in oven and preheat oven to 425-450 F (220 degrees C).
  5. Transfer 1 loaf on its parchment to a rimless baking sheet with a long side of loaf parallel to far edge of baking sheet. Line up far edge of baking sheet with far edge of stone or tiles, and tilt baking sheet to slide loaf with parchment onto back half of stone or tiles. Transfer remaining loaf to front half of stone in a similar manner. Bake ciabatta loaves 20 minutes, or until pale golden. Cool loaves on a wire rack.
redivyfarm's picture
redivyfarm

I spent all day on a long fermentation trying to duplicate bwraith's beautiful sourdough ciabatta. What I produced was the best tasting thing I've baked. On the down side the crumb is unremarkable again, proving I'm starting pretty low on the learning curve. My sourdough starter which has been dormant for months is now hyperactive as evidenced by this proof-

Sourdough ProofSourdough Proof

I think I overproofed. The dough was very soft, very puffy, very sticky!  I had to fold it some more to get it workable for shaping. Onto a cloche for final proof went the dough until I lost my nerve and moved the four ciabattas to oiled paper on a baking sheet. Envision a sticky mess of dough and cloth instead of tasty bread! To get a crunchy crust, I spritzed the loaves with water and steamed with a cup of water in a skillet. This recipe baked 18 minutes at 450 and still came out only a golden brown. Bwraith, how do you do it?

Sourdough Ciabatta #1Sourdough Ciabatta #1

Even if unremarkable in appearance, this bread won't last long. Its delicious!

It is day three for my rye and grapefruit juice starter and as Grandma Gracie would say, it is really going to town!

redivyfarm's picture
redivyfarm

Well I'm starting a self-directed course of study in bread making.  I'm taking inspiration from the products of the very accomplished bakers of The Fresh Loaf community and plotting a course to learn what they know-and-can-do in their kitchens. I plan to document my efforts in this space.

This week I have revived my tired and sluggish sourdough starter with two feedings at better ratios.  I'm happy that the starter doubled vigorously this morning in three or four hours.  It is day three for the rye and grapefruit gruel; patience required there.

Yesterday I baked two ciabatta recipes after preparing the preferments for each the night before. The first is a yeast leavened white that was very successful when I first made it last year.  I experimented by adding unrefreshed sourdough starter in place of the liquid to add flavor. My recipe calls for very little handling, just dividing, shaping and dimpling after the first rise. The bread baked up very moist and light with a gazillion small holes.  The flavor is so good; the sourdough really did the trick. I wonder, do the large holes come from a longer final proof? I've been afraid of letting it go too long and falling flat.

 Baking of 4-11-07Simple Ciabatta: Baking of 4-11-07

Next Ciabatta Integrale as shared by JMonkey. I followed his KA recipe and notes exactly with one exception. When I mixed all of the ingredients I felt the mix was too dry so I added two teaspoons of water before the autolyse.  The hand mixing worked fine for me and allowed me to determine when I thought the hydration was right. As promised, this dough really rises actively! I enjoyed learning the stretch-and-fold technique; that was new to me. My result is a really light and moist wheat bread that is much more like sandwich loaf than a chewy ciabatta. My husband will love it when he comes home because that is what he prefers!

Whole Wheat CiabattaWhole Wheat Ciabatta

I hope to refer back to these ciabattas once I have found my baker's mojo.  To end on a positive note; I haven't baked anything inedible for almost a year!

Pages

Subscribe to RSS - Ciabatta