What do you do with the fruits of a couple of less than successful attempts at a Dark 100% Rye bread?

Altus!

What is altus you ask?

Old bread …namely, ground up leftover rye bread usually soaked in water.

In my case its old (ugly) dark sour 100% rye bread that is soaked overnight in water. I also crumbled dry altus and fed my rye starter portions of this along with normal rye flour.

Old bread, blended, coffee and soaker

I baked three different breads this weekend, all of them utilising altus. First was the “any grain” sourdough, this time in tins, another dark sour rye and the country bread with two starters.

The night before I prepared soakers, starters, milled and sifted the necessary flours so as to make the morning as peaceful and smooth as possible.

Any Grain Sourdough in tins (grains included in total flour)

Formula

Method

1. Autolyse bakers flour and water for 30min, then stir with wooden spoon for 5 minutes.
2. Add the rest of the ingredients and mix 5-10mins. I use a scraper in my right hand to pick up and turn the dough and keep my left hand wet enough to avoid excessive sticking.
3. Allow bulk ferment for 15-30mins.
4. Shape and roll in rolled oats. Place into greased tins (mine were Pullman) seam side down.
5. I proved these for one hour and 45 minutes before placing into oven with lids on for 15 minutes at 270°C  then a further hour at 200°C

Country bread with two starters

I deviated from the procedure described in a previous posting on these breads in two ways.

The rye starter build was a fed a portion of altus crumbs and the final dough had a 200g altus soaker consisting of equal weights of water and dark rye bread.

The altus soaker was blended with water before adding the flours for the autolyse.

I have again tried my hand at a 100% Sour Dark Rye. I had to alter several things for this bake. I am out of rye grains for milling so for this bake I used Four Leaf Millings biodynamic rye meal flour. I also used the altus as a soaker instead of cracked grains.

Dark Rye Bread Ver 3

Formula

Method

1. Soaker is blended with warm water before the rest of the ingredients are added.
2. Mix until well combined.
3. With wet hands shape and place into greased pullman tin.
4. After my previous cases of overproving I watched the dough like a hawk and it seemed ready after one hour. I docked and placed into a 270°C oven for 15 minutes then a further two hours at 200°C.

__

The altus gave the breads a serious flavour kick and moistness to the crumb. The country bread’s crumb was significantly darker from last weeks bake due to the added altus and it was a delight to see the dark flecks of past rye failures given a new life.

… and again I wait with trepidation for the opportunity to cut the dark rye and peer inside…

cheers, Phil

p.s. A little side story ... My partner managed to create her own version of altus unbeknownst to her when she put a rye crust wrapped in a tea towel through the washing machine. Lets just say with toilet training children in the house a rye crust wasn't the first thing that came to mind when she saw the brown lump amongst the towels.

This weekend I finally made a loaf of vollkornbrot, which I'd been planning to do for some time.  It was a lot of fun, and let me try several things that I had not done before:

• I used the formula from Peter Reinhart's Whole Grain Breads, which includes preparing a mash on the first day.  A mash is a thin paste of flour or whole grains and water, kept at 150 for several hours.  The goal of this is to produce what I think can best be described as enzyme craziness.
• I've been on a rye kick lately (rye sourdoughs are currently my favorite type of bread), but had not tried anything more than around 2/3 rye.  While a 2/3 rye dough is a lot different than a wheat dough, the vollkornbrot dough was much different than either of them.
• I bought a grain mill around a month ago, and while I've been very happy with it, I've been using it almost exclusively to produce finely-ground wheat flour.  I'd been holding off using it for rye, as I still have a fair amount of store-bought rye flour to use up.  However, the vollkornbrot recipe calls for coarsely-ground rye, so I figured it would be a good opportunity to break out the rye berries I bought.  For the mash, I actually produced what I would classify as cracked rye (the recipe calls for rye chops), sifting out the smaller pieces to use as part of the flour for the starter.

Day 1 consisted of preparing the mash mentioned above, along with a starter.  Having never made a mash before, I can't really say if mine turned out correctly, but it was gelatinous and quite pleasant-tasting.  I've been maintaining both a rye and a whole wheat starter for a couple of months now, and have had good success with both, but I used the rye starter in this recipe just to make the end result 100% rye.  Since the expanded starter was made of coarsely-ground rye it did not rise much, but smelled terrific.  The mash and starter are pictured below: 

On Day 2, I combined the above ingredients along with a good deal more rye flour and a few other items (including, somewhat surprisingly to me, sunflower seeds).  On a whim, I used a medium-coarse grind on this additional flour as well.  Reinhart lists molasses and cocoa powder as additional optional ingredients, but I decided to leave them out in this batch.  After mixing the final dough, I let it proof - the rise was pretty limited, as one might expect, but it was noticeable.  Reinhart's instructions have this bread being cooked in an open pan, but based on my reading, I wanted to try it with a lid.  However, I do not have a Pullman pan and have sworn off buying any additional kitchen accessories for at least two months.  Instead, I used the oft-recommended trick of covering the pan with a baking sheet (weighed down with a cast iron skillet) to roughly approximately a lidded pan.

After around two hours of baking (including rotating the loaf after the first hour so that it cooked more evenly), I pulled the below item out of the oven.  I was a little bit disappointed with its appearance, as the flour that I can carefully sprinkled inside the pan and on the top of the loaf had mostly disappeared and there were not as many cracks as I was expecting.

The hardest part of the process was still to come:  waiting until Day 3 to sample the loaf.  Fortunately, that was today.  I'd wrapped the loaf in a towel after it cooled yesterday, and when I took it out this evening, it smelled terrific.  Cutting through that crust was a bit of a challenge (as expected), but once I made it through, the crumb was quite soft with a very unique texture.  Reinhart says that using a mash gives the crumb a creamy texture, and while I didn't really know what that meant before trying this bread, I have to say that "creamy" is probably the word for it.  The taste was very complex - it didn't have much of a rye flavor, but I could detect the sourness from the starter, the sweetness from the mash, a hint of the taste of the sunflower seeds, and many other factors that I can't quite place.  For the first time I can remember, I wish that a loaf I made had more crumb and less crust.  I will also be interested to see how the flavors continue to develop over the next several days.  I've included a photo of the crumb below.

Overall, this was a very satisfying bake for me.  I love trying new ingredients and techniques, and when they actually produce something this tasty, it's even better!  I will definitely be baking more vollkornbrot in the future, although I think I may first try a few of the lighter recipes I've been neglecting.  I also plan to save some of this loaf to provide altus, perhaps for Reinhart's Bavarian Pumpernickel recipe.  In addition, I'm now more interested than ever in trying my mill out on different grains and coarser grinds.  So many breads, so little time...