The Fresh Loaf

A Community of Amateur Bakers and Artisan Bread Enthusiasts.

Wolf steam oven

Boatguy's picture
Boatguy

Wolf steam oven

Is anyone using the Wolf steam oven?

mdvpc's picture
mdvpc

We are putting one into our new house.  I will be interested in any experience the folks have also.

barryvabeach's picture
barryvabeach

I have the Viking combi steam oven, and have been using it for a while.  I am still playing around with different settings.   Viking lets you go as high as 440F in combi mode, so that is a little bit of a disappointment, since I usually heat up the regular oven to 500 with the stone to get it up to temp. I have made some nice sourdough in it, as well as some baguettes, and yesterday I made sandwich loaves ( using whole wheat and a ciabatta recipe ).   What has me a little confused is how to prepare.  Sometimes I put in the pizza stone, put it on normal convection, preheat for 1/2 hour, then turn to steam and heat for 5 or 10 minutes, then launch the bread, then turn off the steam 5 to 10 minutes later.  The manual is pretty clear about the fact that you won't see steam at the higher settings,  that is when you set the combi mode to around 200, it looks like a steam bath, around 350, when I open the door I get steam on my glasses, yet at 440, it doesn't seem very humid when you open the door.   One time I tried adding the pan of volcanic rock, and pouring in water, that was a waste since the oven uses convection, all the steam got sucked out of the oven cavity in a few seconds.  A few times I have preheated the stone, then switched to full steam, hoping to get it really moist, but since the upper temp limit for full steam is around 210,  I don't know if the heat from the stone get the thermometer so high that it never really fired up the full steam.  One real benefit is that if you are not using a pizza stone, the oven gets to temp very quick - under 5 minutes.  I have never used a baking oven with real steam injection, so not sure what it should look like.

Boatguy's picture
Boatguy

I'm similarly confused with the Wolf, though I have not yet purchased it.  The documentation is very poor and the staff at the demo center for the distributor (not retailer) were of no help.

These ovens were clearly not designed with bread in mind, they are more focused on steam baking for turkeys, vegetables, etc.  A deck oven would be 430F, get a shot of steam when loaded and then the moisture would be trapped inside the oven until it was vented late in the cycle.

It appears that the steam mode only goes up to 210F, which is just below the boiling point of 212F so there is probably some reason for that.  What I have trouble understanding is how to make the leap from steam at 210F to baking at 425F.

The Wolf does have "convection humid" mode which apparently circulates the air, but does not vent the oven.  This might actually work in conjunction with some spray or a lava rock pan since the moisture would be trapped and still allow baking at 430F. 

Your approach of pre-heating a stone seems like a good attempt to recreate a deck oven.

What procedure has given you the best results with bread?

My gut reaction is that it shouldn't be this hard, we shouldn't have to be trying to out smart a very expensive oven.

 

barryvabeach's picture
barryvabeach

Don't trust your gut, I think it is pretty complex, especially since each manufacturer uses different terminology for the settings.  Gaggenau has it the easiest, IMO,  one dial for temp, one for humidity.  On the humidity side 0 equals vents all moisture out of oven, 30% is no steam is injected, but vents are closed so any moisture in the oven does not get released ( which may be the convection humid on Wolf, though because the heat is coming from an element that is not in the oven chamber, at least in the Viking, all the steam went to where the heating element was ),  then you can keep increasing humidity in different stages till you get 100 percent humidity.  Your Wolf has something similar - regenerate or reheat injects some moisture, just not full moisture.  100 %  humid plus heat (combi mode ) is the setting I use the most, that injects preheated steam, but also adds heat from the heating element, and that has worked the best to give me a good spring. On most machines, you hit a button or key to turn the steam on or off during combi mode,  On the Viking there is a heat range for that setting, it goes up to 440, but well below that as well, I think it just adds extra heat so that you hit the temp.  That is the steam setting at 210 is wetter than the combi setting at 210, because so of the temp comes from the heating element, not the steam.   i never get crackling of the crust, but that may be the dough ( 100 % whole wheat ) or I may not be letting the moisture out.   BTW,  I put together a page with some links to diff manuals and recipes for general cooking.   https://sites.google.com/site/combisteamconvectionsteamoven/home/recipes-and-guides

mdvpc's picture
mdvpc

I did install the Wolf.  I was told by their consultant, a guy named Garth, to use the setting named "Wolf Gourmet", A11.  It asks if you want light, medium or dark.  I use the dark, it steams for about 2 minutes, then 45 minutes later it turns off.  I have used it for all kinds of breads, including mini-baguettes, and it works great.  It does not display the temp, but putting my Thermapen on it, the internal temperature is usually 205-08.

Boatguy's picture
Boatguy

MDVPC.  I want to see if I understand your procedure for bread.  You use program A11 "Wolf Gourmet" and bake for about 45min?  When finished the Thermapen says your loaf is 208F?  But there is no way to know the temperature of the oven itself.  Is that correct?

hbrochs's picture
hbrochs

I have the Wolf Steam Convection oven, we made it part of our kitchen renovation on the advice from a chef friend. Then we didn’t use it for two years cause we didn’t know how, lol. I’ve recently gotten into bread making and the oven is pretty awesome. I’ve been using Auto Steam bake mode instead of the artisan bread mode. I think it steams longer this way. I can set the temp and time. I’ve been setting it for 440 degrees and 40-45 minutes depending on what I’m cooking. During the steam phase the Temp is just over 200 degrees then as it gets hotter the Steam dissipates. When I use the artisan bread mode I get darker crust but not as much oven spring. No need to preheat is a nice feature. No need to drop dough into scalding hot combo cooker is nice too.

Ann Birner's picture
Ann Birner
  • Hbrochs thank you. Your post seems like its based on standard loaves. Have you made baguettes in your oven, any tips?
VirtuRialto's picture
VirtuRialto

Thanks hbrochs, I had a Meile steam oven at another house and loved the ease of use for bread baking. We chose a Wolf steam oven for the new house and I was frustrated with how complicated it seemed. I prefer to manually control steam injection and duration. Your instructions made the process with the Wolf much clearer to understand. I’ve put my first loaf in and after 10 minutes it appears to have a decent spring. Again, thank you. And a big THANKS to “The Fresh Loaf” for creating a great forum for dough geeks.

hbrochs's picture
hbrochs

Hi,

I have not tried to make baguettes in the steam oven.

ive tried to make baguettes once before and it was a pretty big flop. The steam oven may be good because one problem with baguettes is they don’t fit in my round cloche.

I just struggled forming them.

SoCalFran's picture
SoCalFran

New to the Sourdough bread party. We have had a hard time getting flour. Just used Gold Medal All Purpose and a gifted started. Three attempts. All pretty good. Used Artisan and it worked fine. Then tried Auto Steam Bake taking defaults then setting time. Ended up stopping early because it look great. First two were rounds. Last was a loaf shape also Auto Steam Bake about 30 minutes. Looked beautiful. All were cooked on the non perforated flat pan. All tasted great. Need to work on improving the texture.