The Fresh Loaf

A Community of Amateur Bakers and Artisan Bread Enthusiasts.

Today's bake 3-15-2019: Mixed grain sourdough by a new/old method

dmsnyder's picture
dmsnyder

Today's bake 3-15-2019: Mixed grain sourdough by a new/old method

Sourdough Bread

March, 2019

David Snyder

 

My recent trials of sourdough bread production methods have made some very good breads, but still not exactly what I want. I recall that, about 10 years ago, I baked some breads from a recipe developed by a home baker who was an active participant on The Fresh Loaf at the time, “Susan from San Diego.” At the time, I felt it was the bread I had baked closest to my ideal. So, I thought I would return to that bread, applying some procedures I had adopted with good results since that time.

Of note is that Susan's recipe called for two builds of firm starter before mixing the final dough. As I recall, it produced a rather sour, crusty loaf with a moderately open crumb. Back then, I mixed the dough with a stand mixer. For this bake, I mixed by hand.

I made two loaves. One, I cold retarded for 17 hours then left at room temperature while the oven pre-heated. The second loaf was cold retarded for 40 hours. I was eager to see whether the second would be much more sour, as one would expect.

Total Dough

 

 

Ingredient

Wt (g)

Bakers' %

High-protein flour

125

11

AP flour

803

69

Whole Wheat flour

138

12

Rye flour

92

8

Water

826

71

Salt

23

2

Total

2007

173

 

Starter 1st Build

 

 

Ingredient

Wt (g)

Bakers' %

High-protein flour

18

75

Rye flour

6

25

Water

12

50

Seed starter (liquid)

6

25

Total

42

175

  1. Dissolve starter in water.

  2. Add flours and mix thoroughly.

  3. Ferment at 76ºF for 8 hours.

  4. Proceed to 2nd build or refrigerate 1st build overnight and continue the next day.

 

Starter 2nd Build

 

 

Ingredient

Wt (g)

Bakers' %

High-protein flour

104

75

Rye flour

35

25

Water

69

50

Starter 1st Build

42

25

Total

250

175

  1. Dissolve starter in water.

  2. Add flours and mix thoroughly.

  3. Ferment at 76ºF for 8 hours.

Note: If not ready to make the Final Dough when this starter build is ripe, the starter can be refrigerated for up to 3 days, until you are ready to proceed.

 

Final Dough

 

Ingredient

Wt (g)

AP flour

803

Whole Wheat flour

138

Whole Rye flour

50

Water

743

Starter 2nd Build

250

Salt

23

Total

2007

Procedures

  1. In a large bowl, mix the water and the flours to a shaggy mass.

  2. Cover the bowl and let rest (autolyse) for 1-2 hours.

  3. Sprinkle the salt over the dough and add the starter in chunks.

  4. Mix the dough to incorporate the added salt and starter uniformly.

  5. Transfer to a clean, lightly-oiled bowl and cover.

  6. Ferment until expanded by 75% with stretch and folds at 30, 60 and 110 minutes. (I do the first two S&F's in the bowl and the third on a lightly floured board.)

  7. Divide the dough as desired and place in floured bannetons or on a couche. Cover.

  8. Proof at room temperature for 1-3 hours, then refrigerate for 8-40 hours (or more?).

  9. If you think the loaves need it, proof at room temperature for additional time before baking.

  10. Transfer to a peel. Score as desired.

  11. Bake: If baking in a Dutch oven, bake at 475ºF covered for 30 minutes, then uncovered at 450ºF for another 20 minutes or until done to satisfaction.

  12. Bake: If baking on the hearth, pre-heat oven at 500ºF for 1 hour with baking stone and steaming apparatus in place. Turn down oven to 460. Load loaf and steam oven. After 15 minutes, remove steam and continue baking for 30-40 minutes, until loaf is baked. (Depends on size and shape of loaf.)

  13. The bread is done when the crust is nicely colored and the loaf sounds hollow when thumped on the bottom. The internal temperature should be at least 205ºF.

  14. Transfer the bread to a cooling rack and cool thoroughly before slicing.

The crust was crunchy in the darker-baked parts and chewy in the rest. The crumb was moderately open and mildly chewy. The flavor was complex, sweet and creamy. There was the slightest hint of acetic acid tang. Interestingly, even though the whole wheat was only 12% of the total flour, the distinctive flavor of Turkey Red wheat came through.

I baked the second loaf 40 hours after retarding it, including the last hour at room temperature, while the oven preheated. It turned out ... well ... it was kind of spectacular, in my humble opinion.

The crust is crunchier. The crumb has the same chewing consistency - what I call tender/chewy - but it is substantially more open, and the flavor is substantially more sour. Interestingly enough, I think creamy, lactic acid flavors still predominate, but there is more of an acetic acid tang. Now, that is all based on a first taste when the loaf was just completely cooled. If the flavor profile evolves, I'll add a note.

As far as I can recall, I have only retarded dough for more than 24 hours once before. That was an experiment with my San Joaquin Sourdough, and the retardation was of the dough before dividing. Today's loaf is so good, that I believe I'm going to stick with this routine for a while. It sure made delicious bread.

Happy baking!

David 

Comments

Bröterich's picture
Bröterich

David, you never cease to amaze me. I love reading your blog and recent entries.

I  normally stick to simple tried and true recipes without straying too much from the original. 

I'd love to taste this bread.

Tom

dabrownman's picture
dabrownman

So how do you like this one compared to the your SFSD version 4?  Version 4 was our favorite that Lucy used to make her way with a bran levain and a bit more multi grains and water. .  Can't wait to see the 40 hour version of this one too.  Very oce bread all the way around.

dmsnyder's picture
dmsnyder

Look at the 2nd loaf!

It has been a long time since I baked that SFSD series. I can't really recall how they tasted. 

David

dabrownman's picture
dabrownman

sort of white SFSD bread we have sen in long time!  Spectacular is right.  I can see a 40 hour retard at lower hydration and a bit of mixed whole grain in Lucy's future:-)   Well done indeed!

Danni3ll3's picture
Danni3ll3

Wow! That takes some planning! How cold is your fridge?

Your loaves are outstanding! I need to try this when I have some time in between my regular weekend baking!

 

dmsnyder's picture
dmsnyder

The way I see it, the longer retardation is liberating. Since the bread can be baked after any time between 12 and 40 hours in the fridge, your convenience can dictate when you bake it. It's good in any case.

My fridge runs around 42ºF.

David

Debra Wink's picture
Debra Wink

The crust. The crumb. Just beautiful :-)

dmsnyder's picture
dmsnyder

I appreciate your kind words.

David

davey1025's picture
davey1025

Dave,

I have 4 loaves of this recipe in the fridge now but I have one question. After taking dough out of CF how would I know if it needs more proofing at RT?

 

I kept back a little dough and let it sit at RT for about 4 hours, wanted to see how it would come out. It was tasty and delicious. One question the large crumb in this photo is that from working the dough to much? Will the dough that is sitting in the fridge develop smaller crumb?

 

 

This dough is nice to work with

Thanks

Dave

 

Multi loaf

Muti crumb

dmsnyder's picture
dmsnyder

I use the "poke test" to judge the stage of proofing. The loaf is ready to bake when the depression made by a finger poke springs back very slowly.

My experience with loaves cold retarded for 40 hours is that they have more sour flavor and the crumb is more open.

One of your photos didn't display. The crumb photo that does display shows some very large holes. That can be from a shaping problem or, more likely, from over-proofing.

David

davey1025's picture
davey1025

I would have to guess it is from shaping as I followed your instructions. We shall see after I bake off the other loaves.

I think I will bake 2 tonight after 24 hours and then the other 2 tomorrow night after 48 hours.

Also I am going to try and get a darker crust like yours..........your info helps me a lot

 

Thanks

 

davey1025's picture
davey1025

Dave, Thanks for sharing your knowledge and your recipe! I gift my breads away but I kept one to cut tonight and see how the crumb came out. I noticed you didn't pre shape is there a reason you don't have to? Also I might have RT it a bit to long, with a long CF is it ok to under ferment? The large holes is that from over fermenting?

 

Thanks

 

Dave

dmsnyder's picture
dmsnyder

I did pre-shape. I just neglected to document it, I guess.

I associate those huge holes with over-proofing.

David

davey1025's picture
davey1025

The photo taken with the larger holes was on the end of one of the breads, I think this photo is a better representation of how the breads came out.

I will make this recipe again this weekend, if you are looking for a bread that gives the most flexibility to bake THIS is the one.

cfraenkel's picture
cfraenkel

First off, this looks amazing, and I am preparing to bake a loaf or two right now.  My question is, I use a NMNF starter (not liquid). In your opinion, should I build it up to a liquid starter first, and then carry on, or could I just do the levain build with the NMNF?  I'm thinking it should be fine with the later, since I'm doing a levain build anyway - but value your opinion.

dmsnyder's picture
dmsnyder

use your firm starter. It will be fine.