The Fresh Loaf

A Community of Amateur Bakers and Artisan Bread Enthusiasts.

Skim milk powder

nbicomputers's picture
nbicomputers

Skim milk powder

I have seen several posts on the subject of milk powder and subtuting fresh skim milk.

While there are forulas for adjusting for the lactouse (milk sugar) and the milk fat i am going to keep this basic.

i am posting to make a correction in a nother thread that i saw

in this thread

http://www.thefreshloaf.com/recipes/italianbread

two people were discusing

No powdered dry milk?

I have always subbed skim milk (that's all I drink) in place of the dry. So I would use 1/2 cup of milk and 1 1/2 cups of water. I wouldn't think the fat content of whole milk would make much difference. I find no discernable difference, it is such a small amount.


score: 0[+][-] user icon Submitted by KipperCat on June 22, 2007 - 11:59pm. A more precise substitution

A more precise substitution for the 1/2 cup powdered dry milk and 1-1/2 cups water would be 1-1/2 cups milk and 1/2 cup water.  I imagine either way will give you good bread, but there are some areas where the milk/water difference would make quite a difference.

To get 1 cup of milk, place 1/3 cup of powdered milk in a 1 cup measure and fill the cup with water. These figures are for instant powdered milk, they may be different for the non-instant kind.

----------------------------------------------------------------------------------------------------------------

The fact is that while milk powder adds weght IT DOES NOT ADD VOLUME it disolves freely in waterso while 8 oz of weght plus 1 oz milk powder = 9 oz by weght it is still 8 oz by volume (one cup) so if you are subing 1 oz of milk powder and 1 cup water the replacment would be 1 cup milk(as i sait there are other changes to account for the lactouse and milk fat but in small home mixes there is so little the change it wall make not be noticed and if going from skim milk powder and water to fresh skim milk the fat is still zero and the lactose will also be the same. Ps: 4 oz of milk powder by weght mixed into 1 quart (by volume) will yeld 1 quart by volome of milk that is the industry standered ( 4oz powder milk per quart water)in most formulas the dry milk is added with the dry ing Ie sugar flour there is no need to reconstute the milk in the water before adding it to the formula.  It will reconstute when the water hits it during mixing
PaddyL's picture
PaddyL

I was making baps one night, and added the milk granules right after putting in the vegetable oil and I ended up with clumps of oily milk, so be careful there.  Now I try always to buy real powdered milk rather than the granules, but I'm still careful not to add the milk powder and oil together.

nbicomputers's picture
nbicomputers

Adding any powdeer to oil will cause clumping execpit flour of course because the oil will coat the powder and prefent it from contacting water.  Unless the powder is soluble in oil.

you can mix the milk powder it with the flour or if using shortening or other solid fat blend it with the fat untill you have a paste. thge reason is for a even distribution of the milk. when the water hits it you should be ok.

As the flour absorbs the oil the water will get to the milk powder.

ps this is what i found so i am sure this is not what you ment?

http://www.urbandictionary.com/define.php?term=baps

Pro Baker for over 25 years-----Ret

Paddyscake's picture
Paddyscake

I was poster # 1 in that thread..your explanation makes perfect sense..