The Fresh Loaf

News & Information for Amateur Bakers and Artisan Bread Enthusiasts

Hobart HL6 on ebay

Bob Marley's picture
Bob Marley

Hobart HL6 on ebay

Waddayall think of this unit?? Looks like it was made in Sweden but from the looks of things, it looks like a great, well built unit.

richkaimd's picture
richkaimd

I have had a 6qt KitchenAid for many years.  I use it now and again but rarely for breads unless I'm making a single loaf of smallish weight.  I don't like how hard it is to add ingredients, how it tosses flour around the counter even if and when I remember to use the (poorly designed) clear plastic bowl guard, and how it has a tendency to walk around the counter making it necessary to stay with it all the time when I need it to run for 10 minutes straight for some dough or other.

I also have an old Electrolux DLX, now called an Anksarum, I think.  It is what I use for larger volumes of dough, e.g., for 3 large loaves of challah.  It is easy to add ingredients, whether liquid or dry, without spilling onto the counter.  It never tosses flour outside the bowl.  It is solid as a rock on the counter.  And it never struggles with the doughs I make.  In addition, while it has a somewhat larger footprint than my KA, it is shorter, making finding counter or cabinet space easier.  And, even new, it's less expensive than the Hobart you're picturing.  With some luck, you can find a used one on Ebay.  Mine, now over 15 years old in my hands, was purchased used on Ebay.  It still looks as good as it did when I got it and it runs like a charm.

I say spend your money elsewhere unless you're a collector of tools rather than a user of them.

 

Yerffej's picture
Yerffej

Looks like a nice mixer.  If bread is your primary use, the limited capacity is a bit of an issue.  If you only make a loaf or two at a time than it would not be an issue.  For a multi-purpose all around mixer, I think that it looks quite nice.  To my knowledge, the quality of a Hobart mixer is still quite high.  One should not confuse a modern KitchenAid of questionable quality made by Whirlpool with anything made by Hobart.  They are worlds apart.

I use a 30 year old Hobart made KA mixer at home and I really like for an all purpose mixer.  I would not buy a modern KA mixer.

Jeff

Bob S.'s picture
Bob S.

Too bad Hobart never marketed the HL6. At least it has a spiral dough hook, which should make it a good mixer for bread.

Plan2build's picture
Plan2build

I just picked one of these up...it was indeed new.  I also owned the KA Pro600 and a KA Artisan.  The Artisan 5Qt burned up the motor and the Pro 6Qt has a stripped worm gear (new gear on order so I can repair).

The primary difference between this and the KA is this one seems to have an independent fan motor, so that regardless of the motor speed, the fan is running constantly.  Underneath the base of the upright support is a fan grate for exhaust and the fan intake is underneath the upper motor housing.  I just ran a two loaf sourdough recipe (1 cup starter, 1.5 cup water, and 5.5 cup flour.  I kneaded on speed 1 for 15 minutes and the motor was barely luke-warm and it ran fine with no effort.  my KA would really struggle with the same recipe so I decreased it, but with no luck as the gear eventually stripped (probably from overloading).

The KA cannot knead for more than several minutes without heating up, and indeed the manual says the mixer would get hot to the touch as this is normal (I don't think it should be normal but that is what the manual says).  Anyway, the Hobart HL6 blows it away, at least for now anyway.

One shortcoming I have noticed with the Hobart is the dough hook.  For some reason, this design likes to let the dough slightly climb the hook, similar but not as bad as C-hook does on the KA Artisan.  I don't even worry about it and just let the machine do its thing, and the dough eventually falls back down and kneads correctly.

The motor is variable speed, like the KA Pro600, but has fewer speed settings.  The speed 1 for kneading seems to be a bit faster than the KA on setting 2, but it is hard to tell as my KA is currently not running.

If you have any questions on the mixer that I can answer let me know.  I am new to the postings here, but have been reviewing this site for the last 6 months.  If this HL6 mixer proves me wrong, I am moving on to a Hobart N50.

P2B

JohnCA's picture
JohnCA

Good day,
I am looking to buy a small durable mixer to knead 55% to 62% hydration dough. How is your HL6 doing? Is it as good as Hobart N50? I would appreciate it if you could share your experience with HL6.
John

Plan2build's picture
Plan2build

John,

The HL-6 is still going strong after these several years.  For the price vs the N50, I am very happy with the performance.  Again, the maximum that I push it is the sourdough in my original post...and it does fine with no issues (like my previous KA's that broke down under the load).

There are some available on eBay from one particular seller...do a general search for "HL-6 mixer" and you will see a used one and another vendor with 9 available...this is what I got.  In the pictures you will see they are actual Hobart accessories and the mixers are made in Sweden.  For the price you could get 4 or 5 for the price of one N50.

Based on my usage, the HL6 is perfect, but your mileage may vary with your recipe...however I think you might be please with the 6qt size and the capability.  Good luck with your search....

P2B

 

JohnCA's picture
JohnCA

Thank you for the info.

JohnCA's picture
JohnCA

Does the HL6 machine weigh 35 lbs? Is it much heavier tha n KA Pro 600? Thanks.

Plan2build's picture
Plan2build

The mixer itself weighs between 22 and 23 lbs without the bowl and accessories.

chadmmason's picture
chadmmason

I have a HL6 and I love it. The quality of everything I make with it improved dramatically. I am looking for a great pasta attachment.