The Fresh Loaf

A Community of Amateur Bakers and Artisan Bread Enthusiasts.

SFBI Artisan II Workshop - Day 2

dmsnyder's picture
dmsnyder

SFBI Artisan II Workshop - Day 2

Some of the breads I baked on Day 2

The second day of the Artisan II workshop was spent mostly baking the breads for which we had fed the levains and scaled the ingredients yesterday. We also mixed levains and scaled for tomorrows bakes. Classroom time was bits and pieces between dough foldings and during fermentation, but the content was very good.

The instructional goal of today's baking was to see the effects of different types and proportions of levains on flavor. We baked four breads which differed only in these respects.

  1. Bread made with a levain fed once a day. (All the others were made with levain fed twice a day.) This bread was notably more sour than any of the others.

  2. Bread made with liquid levain at 100% hydration. (All the others were made with firm levain at 50% hydration.) This bread had notably less acetic acid tang and a noticeable milky lactic acid flavor – very pleasant.

  3. Bread made with 40% firm levain.

  4. Bread made with 70% firm levain.

     

The last two were not very different from each other in sourdough tang, but the 70% levain bread had a less pleasant, “metallic” after taste, according to some. I didn't perceive the after taste myself. The main take away lesson was that the frequency of starter feeding has more impact on bread flavor than the amount of levain used in the final dough and that the use of liquid versus firm starter really does make a difference in the balance of acetic versus lactic acid flavor in the bread.

Preparing to taste the breads

In the classroom today, Frank reviewed the application of baker's math to breads made with levains and the SFBI's recommendations for levain maintenance for home bakers. I won't go over the baker's math topic, but I'm sure the recommendations for levain maintenance are of interest to many.

The SFBI staff clearly favors keeping liquid levains and twice a day feedings. They also favor keeping your mother/stock starter at 400-500 g. They say smaller amounts result in poorer flavor. However, they also favor feeding your starter in a manner which minimizes the amount of starter you end up discarding. This is accomplished by determining exactly how much starter to feed to get the amount of levain you need to make your dough and not making too much excess.

For a liquid levain feeding, the recommended formula is:

Flour 100% (75% AP flour + 25% WW)

Water 100%

Starter 40%

Again, it is recommended that you feed every 12 hours and that you do two feeding prior to mixing your final dough.

For a firm levain feeding, the recommended formula is:

Flour 100% (same mix as above)

Water 50%

Starter 50%

For the weekend baker, it is recommended that you feed your levain (liquid or firm) as follows:

Flour 100%

Water 50%

Starter 25%

And refrigerate this immediately after the feeding. Activation prior to baking should done with 2 feedings (as described above) at 12 hour intervals. In other words, to mix a dough on Saturday morning, the refrigerated starter should be fed Friday morning and Friday evening.

Frank told us that all of these recommendations derived from extensive experimentation with different formulas and schedules. SFBI staff believes that they result in the best tasting bread. (Need I say that, if your taste differs, you come out of this workshop knowing just what you need to change to get the flavor you prefer?)

At the lunch break, I asked Frank about the formula for miche in AB&P which violates almost all these recommendations. I have described this previously in my TFL blog. He thought this was interesting enough to provide the answer in the next class session.

Michel Suas' intension with his miche formula was to reproduce a bread as close to the traditional miche as possible, and that required knowledge of traditional French village home baking. In the old days – say 150 or more years ago – home made bread was mixed at home but taken to a communal oven or to the village baker to bake in a wood fired oven. The loaves were huge, by today's standards, because baking was a once-a-week chore. So, after the dough was mixed (before adding salt), a portion was removed to perpetuate the culture. This was fed through the week every day, without discarding any of the growing levain. On baking day, some additional flour and water were added, as well as the salt. But, the bulk of the dough consisted of the built up levain. Little additional fermentation was needed. The resulting loaf was very large, very dense and very, very sour. (Frank describes this with a look of disgust on his face.)

While today's breads were baking, we mixed the levains and scaled ingredients for tomorrow's bakes. We will be baking a variety of breads with levain that were made with commercial yeast during the Artisan I class: A whole wheat bread, multi-grain bread, rye bread and challah. We also fed our “from scratch” starters with which we will make breads Friday.

David

Comments

Syd's picture
Syd

Thanks for the detailed reporting, David.  I am reading it with great interest.

Syd

hansjoakim's picture
hansjoakim

Very interesting to read, both day 1 and day 2 summaries, David. Thanks for sharing your experience with us!

Are the formulas you work through identical to those in ABAP, or do the SFBI staff use different material when teaching the course?

Interesting to hear about how levain feeding impacts the bread flavour. What about crumb structure? Did you notice any visible differences in the crumb for the two?

dmsnyder's picture
dmsnyder

The formulas we used in Artisan I and those I've looked at so far in Artisan II are not in AB&P or are modified to some degree. There are a couple of them that I have not done comparisons on to date - challah and the multi-grain bread. (and, at no additional charge, a preview of coming attractions: sourdough ciabatta!)

Regarding crumb structure: All the breads had a lovely open crumb structure and that wonderful cool mouth feel. There was no significant difference among the formulas that I could discern. I think I heard Frank remark on this, in fact.

David

rossnroller's picture
rossnroller

Thanks so much for that excellent rundown on Day 2.

I was agreeably surprised to learn that I am doing most things 'right', which I think is largely due to prolonged exposure to the fabbo information people share so generously on this site, and taking notes each bake over a prolonged period of time. Your observations on the flavour of breads made from 100% hydration starters equate precisely with mine.

Very interesting that the SFBI recommends kept starters have a minimum weight of 500gm to optimise flavour. Hadn't come across that before.

Illuminating background to the Suas miche.

Hanging out for your report tomorrow! You must have to push yourself to write out a  comprehensive report for our benefit at the end of an intense day of learning and baking. Much appreciated.

Cheers
Ross

 

arlo's picture
arlo

Day two sounds like where the fun really begins David. I can't thank you enough for this awesome coverage!

SylviaH's picture
SylviaH

Loved this report and looking forward to more...Nicely written and thanks for sharing.  I'd much rather be there than shopping 'lol'

Sylvia

davidg618's picture
davidg618

These refinements, especially for starter maintenance, and levain building will help me tweak those techniques that have evolved from my trials and errors.

I'd love to attend an SFBI workshop, but 1) I don't want to begin with breadbaking 101: I think I'm past that stage, but I understand I would have to take SFBI stage 1, before I could take what you're taking now; and, 2) we've got our next two years of travel planned, and it would be unfair for me to usurp a shared trip.

Consequently, I'm enjoying--too small a word--I'm lusting after all the detailed knowledge you can share during your week in San Francisco. When I was still working I traveled the world; San Francisco remained one of my few favorite cities. I envy your experience. Keep the posts coming.

David G.

proth5's picture
proth5

I know you are writing this after a hard day's baking, but I'm a bit confused about the formulas for the four breads.

Numbers 3 and 4 are made with a firm levain (50% hydration) - the 40 and 70 % refer to  - well that's the question - 40% of the total dough weight was the levain- or - ?

"My teacher" once extolled the virtues of keeping a larger quantity of storage starter.  And of course, I've always followed that policy, but have kind of "let it go" on these pages as so many people are concerned about "wasting" flour.  I was glad to see the theme recur with another perspective.

Have fun!

dmsnyder's picture
dmsnyder

The levain percentages are baker's percentages. So, "40% levain" means that the weight of the levain in the final dough equals 40% of the total dry flour in the final dough.

Regarding starter volume's impact on flavor: I had an "Aha! moment" when, in another context, Frank pointed out that flavor development happens during bulk fermentation, not during proofing. The reason is "the mass effect." (BTW, the context was a discussion of cold retardation during bulk fermentation versus after shaping.)

Re. "wasting flour:" In the bakery, wasting 200 g of starter is not so much, considering you are mixing many Kg of starter at a time.

David

proth5's picture
proth5

As I said to your next post - wow.  That is most definitely unexpected bakers math.  Really.  The Bread Baker's Guild of America - among whose membership are people affiliated with SFBI - has standardized differently.  Good thing it's you and not me attending that class.  I can't wait to hear the explanation for this.

I've done my own analysis of the meaning of "waste" and I find that, for me, the expense of keeping my levain "bake ready" so that during the all too brief periods that I am home I can actually bake is not really a waste.  However I have found that many people on this forum are very sensitive to spending the extra money and the debate will become too passionate for me to advocate keeping the quantity of levain that I do.

The aha moment hit me long ago, though...

longhorn's picture
longhorn

Hi David!

Great to read your recap! Sounds like you are getting results consistent with my experiments with starter hydration. But i had not tried the feeding variation. Appreciate your sharing!

One question I would ask relates to how "hard" they are finishing the bread - i.e. to what internal temperature.I am suspecting 208-209 from your comments. Or are they measuring that!

I am looking forward to my trip to SFBI this summer and learning how to form a baguette "properly".

Thanks!
Jay

Syd's picture
Syd

I must say I have also had better results with keeping a larger starter.  I have always wondered how the people who keep walnut sized starters in the fridge manage to get any life out of them after long storage.  It just seems logical that there wouldn't be enough food to sustain them over a long-ish period of time.

My starter is never less than 250g (50g starter, 100g flour and 100g water) and often it will be as much as 375g ( 75:150:150).  I find the larger the amount of starter the quicker it doubles.  With these figures, and in our very warm climate, my starter doubles in 3 hours, triples in 4 and quadruples in 5-6.  If I keep it out of the fridge in summer, I have to feed it 3-4 times a day.

Naturally, I think it would be ideal not to have to refridgerate it, but it is just not practical.  And unless you were using it all for baking, it would be too wasteful.  However, I usually  bake every weekend and always get good results with two, sometimes three (Thur. lunch, Friday night and Sat. morning) refreshes before baking.  During the hot weather I find my starter is past its peak on Saturday morning after a Friday night refresh (even if it has only been six hours) and I have to refresh it again Saturday morning to mix the dough Saturday luncn time. 

 

wally's picture
wally

Thanks so much for passing on your daily learnings.  This is really quite an education you're getting (and we're receiving) on levains and the differences (subtle and large) that lurk within them.

Great information!

Larry

breadsong's picture
breadsong

Thanks so much for taking the time to document your daily lessons.
This is the next best thing to actually being there.
from breadsong

 

 

GregS's picture
GregS

David,

Thank you for this detailed discussion. I picked up something I must have misunderstood in my long distance learning out here in Hawaii. In the para. below the heading "For a firm levain feeding", you say:  "And refrigerate this immediately after the feeding."

I have had the impression that after feeding a starter one should let it double (or more) at room temperature, to the point where it loses its energy. At that point it gets refrigerated until needed. Are there different schools of thought on this, or have I just missed the point? I guess I could analyze the concept by thinking that the starter might need its feeding to work on during the relatively long refrigeration period. I'm a weekend baker, so optimally, I would like to feed only once or twice a week.

Your interpretation would be a great help.

Thanks,

Greg Schultz

dmsnyder's picture
dmsnyder

Hi, Greg.

The SFBI method assumes you will be refrigerating the starter for a week without using it or feeding it. It is refrigerated right after mixing. Note that it is going to be activated with at least 2 feedings before mixing the dough for a bread.

I hope this answers your questions.

GregS's picture
GregS

Thank you very much, David.

The "bake once a week" regieme works well with the rest of my life. This is very helpful in trying to maximize my starter performance. I enjoy significantly sour loaves, so I assume this long slow hibernation and cool temperatures might also  favor the lactic (?) bacteria.

Aloha from Hawaii.

Greg

ml's picture
ml

Hi David,

You have answered so many of my questions about starters, thank you.

I am wondering, after your SFBI classes, if you changed the starters you keep on hand, or the ingredients used in them?

Margie